Page 1 of 1
part cooling fan
Posted: Sun Jan 28, 2018 12:57 am
by keyser187
hi all,
could i use the fans from an old x box 360 as a part cooling fan or would these be too big and heavy?
not sure on there exact size as i have took them out yet, but im sure they are going to be bigger than 40mm
im on a i3 pro w mk8 extruder
Re: part cooling fan
Posted: Tue Jan 30, 2018 1:48 pm
by William
In theory, as long as their parameters are similar, it is possible
Re: part cooling fan
Posted: Tue Jan 30, 2018 9:30 pm
by keyser187
thanx william, but i took them out and it is two fans joined together so i might use it as a fan to cool the board when i get round to putting the board and wires into some sort of housing if thats possible?
specs are
SUNON Maglev
kde1207ptvx-a
DC12v 2.8w
made in china
they both have two wires that connect to a 3pin plug so would i just plug it into the where the board fan is now 'fan 3' on the board (gt2560 rev a)
Re: part cooling fan
Posted: Fri Oct 22, 2021 2:52 pm
by aricjoshua
Thank you for sharing! I pulled them out and discovered that they are two fans linked together, so when I get around to placing the board and wires into some type of enclosure, if that's feasible, I may use it as a fan to cool the board.
cookie clicker
Re: part cooling fan
Posted: Fri Nov 19, 2021 8:36 pm
by GaryThomas
Reality of New Mahindra
Bolero 2022. New Mahindra Bolero fake news trending. This is NOT the new ...
Re: part cooling fan
Posted: Thu Dec 09, 2021 4:23 pm
by David18
New Anime Added: Winter 2017 Anime Season, Shows Added:
KissAnime blog on the latest and newest anime episodes.