print quality
print quality
hi i have a problem with the print quality. does anyone know what i could do to resolve it.
- Attachments
-
- IMG_1498.JPG (252.37 KiB) Viewed 7357 times
-
- IMG_1499.JPG (281.01 KiB) Viewed 7357 times
Re: print quality
Hi
I suggest you read this first:
https://www.geeetech.com/forum/viewtopi ... 275#p85275
Applies to a different printer model but the problem is similar.
If in doubt, ask further.
I suggest you read this first:
https://www.geeetech.com/forum/viewtopi ... 275#p85275
Applies to a different printer model but the problem is similar.
If in doubt, ask further.
On the forum I help to use the rod, I don't give fish.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Geeetech Prusa I3 M201 Dual extruder Mixcolor 3D printer, bought 2017-12-19, already built, in the cognitive and improvement phase
Geeetech filament, ABS only
Geeetech 3D WiFi Module for 3D Printer, bought 2018-04-15, He got a new life, and still lies in a drawer.
Positively frenzied customer of Getech Technology.
Re: print quality
How much did you set the nozzle diameter and layer height?
Did you calibrate the E step?
Did you calibrate the E step?
Re: print quality
thanks for replying. i set the nozzle diameter at 0.3 mm and the layer height at 0.35 for the first layer then 0.3 for the rest. i haven't collaborated the esteps and i don't know how to.
Re: print quality
You can try layer height with 0.15-0.2mm for other layers, 0.2-0.3mm for the first layer.
How to calibrate the Estep?
https://www.youtube.com/watch?v=LzZZaGmeX8w
How to change the Estep value?
Use Gcode M92, try to search more information about step/mm change in the forum or Google.
