Hello all together!
I'am not satisfied with the Quality of my dual Color prints. My G2S with two nozzles is hard to adjust, so ist dificult to calibrate for both nozzles and ist also hard to get a good print.
Now i want to switch my two nozzle heatend from G2S to the 301 Diamond heatend. Of course just with 2 Extruders instead of 3.
My Problem now in the Firmware is:
G2S has two heating elements, each per hotend, now i have just one heating element for both hotends.
Can u please tell me at wich line in the Firmware i can fix it? In my opinion the Firmware has to know that for Extruder 1 and 2 had to use heating element and thermisor of Extruder 1.
I hope you understand me ;-)
Can u please help?
Delta G2S with 301 Diamond Nozzle
Re: Delta G2S with 301 Diamond Nozzle
Remove the second one
And you need to change this line
And you need to change this line
- 去除1.png (19.28 KiB) Viewed 3592 times
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!