Manual Mesh Bed Leveling i3 pro b

Post Reply
hamoda
Posts: 1
Joined: Wed Aug 12, 2015 3:00 am

Manual Mesh Bed Leveling i3 pro b

Post by hamoda » Tue Sep 21, 2021 8:25 am

Hi guys,

I want to make manual mesh bed leveling on geeetech i3 pro b, and after saving the mesh points and start printing the nozzle still not leveled perfectly and changing z bed value while printing is not working ( I change the values in LCD but nothing happens)

I use marlin 1.0.9
what should I do?
Top
Post Reply

Return to “Geeetech I3 Pro B”