"No SD Card" but "Card inserted"

[Gabryzzzzz]

When i put the SD card i can see "Card inserted" but in the main menù i see "No SD Card", somebody can help me?

[Admin]

Hello, please try to replace the TF card or format the TF card, it may be the problem of the TF card.
If it still doesn't work, it may be a problem with the TF card slot of the motherboard. It is recommended that you replace the motherboard with a new one.
You can contact geeetech for replacement.

[Gabryzzzzz]

Hello, please try to replace the TF card or format the TF card, it may be the problem of the TF card.
If it still doesn't work, it may be a problem with the TF card slot of the motherboard. It is recommended that you replace the motherboard with a new one.
You can contact geeetech for replacement.

I'm sorry if I reply only now, I solved the problem by using a laptop and I print via a USB port (honestly I think is better). Until I don't need an sd car I prefer don't waste time with a board replacement.
I still not print anything yet, I have a bigger problem, the extruder stops pulls the filament and made a clicking noise and this stop the print randomly, if you can help me I'm very happy, anyway thank you for your support.

(My English is so bad, I'm Italian)

[wade95646]

When i put the SD card i can see "Card inserted" but in the main menù i see "No SD Card", somebody can help me?

In the device manager,mygiftcardsite look for a device labeled “SD host adapter.” If you see it, your computer has a built-in SD card reader. If you can locate the slot but not the device listing, or see the listing but not the slot, contact your computer's manufacturer for more information.