LCD Panel display random characters

Post Reply
neilfrancom
Posts: 1
Joined: Fri Feb 07, 2020 2:07 am

LCD Panel display random characters

Post by neilfrancom » Fri Feb 07, 2020 2:22 am

I have just built my i3 Pro B and when I switched on, the green display panel just shows a garbled mess which changes every few seconds. I've tried reversing the cables with no luck and the reset button has no effect. As far as I can tell I've done everything by the book and I'm desperate to start using the printer. Can anyone please help?
Attachments
59B9C7BB-26E4-4D45-983F-34F61201D0C2.jpeg
59B9C7BB-26E4-4D45-983F-34F61201D0C2.jpeg (48.54 KiB) Viewed 5594 times
Top
cconway
Posts: 1
Joined: Sat Feb 22, 2020 3:59 pm

Re: LCD Panel display random characters

Post by cconway » Sat Feb 22, 2020 5:36 pm

I have the exact same problem - did you manage to resolve this?
Top
RichPrice
Posts: 3
Joined: Mon Mar 23, 2020 3:12 am

Re: LCD Panel display random characters

Post by RichPrice » Mon Mar 23, 2020 3:13 am

I just built my brand new DIY I3 Pro B and have the exact same fault.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: LCD Panel display random characters

Post by William » Mon Mar 23, 2020 10:52 am

Hi, You can check if your lcd cable is reversed,
Then reconnect.
Garbled screen may be caused by signal interference.
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 Pro B”