y axis will not home

Post Reply
mactuan12
Posts: 1
Joined: Mon Jan 13, 2020 5:52 pm

y axis will not home

Post by mactuan12 » Mon Jan 13, 2020 5:54 pm

I have just uploaded the new Firmware for my GT 2560 board using Arduino 1.0.1. I now find that my Y Axis will not home correctly. The reading on the LCD screen is X 90 Y 50 and Z 0. Everything was working ok before I updated the Firmware so can you please advise me on what to do and how to do it to get the Y Axis to home correctly. The Firmware I uploaded was Marlin-PI3_Pro_B. I am a newbie at this so your help will be much appreciated.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: y axis will not home

Post by William » Mon Jan 13, 2020 6:02 pm

:D Hi, You can download the compiled firmware on the official website,
https://www.geeetech.com/download.html?download_id=34

Use the firmware kit for uploading and viewing.
For specific operations, you can refer to: viewtopic.php?f=20&t=69684
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
Post Reply

Return to “Geeetech I3 Pro B”