X-Axis not moving

[PasWeb]

Hello together,

I just assembled my new printer and got some trouble with the x axis not moving. I already tried some things on it:
- Switching to the y axis control on the mainboard, it is moveable through y axis movement, but the y axis controlled by x axis is not moving (so motor is not defect)
- Switched the cable, no affect (so cable is working)
- Changed the driver thingis on the board, doesn't help at all, the x axis slot isn't working

Don't know what to do, please help...

Best regards
Pasweb

[William]

Hi, You mean to swap the motor line of the x-axis to the motor of the other axis.
Is the motor also running?

There is no problem with the x-axis motor and motor line.
Then you need to replace the motherboard, there is a problem with the x-axis motor slot.

[_kaktus_]

Hello.


It is worthwhile to try to improve the soldering pads of the socket.

Maybe there is a cold solder there It is worth to improve the contacts with the hot soldering tip of the soldering iron.

[PasWeb]

Yes, Motor is okay an the cable to the motor also.
That's unlucky, how do I get a new board?

Also I recognized the problem with the z axis not moving properly, maybe I got a monday model?

[_kaktus_]

Hi.


You can describe your problems to your dealer, the controller board should be replaced with a working one.

[William]

Yes, Motor is okay an the cable to the motor also.
That's unlucky, how do I get a new board?

Also I recognized the problem with the z axis not moving properly, maybe I got a monday model?

Hi, You can contact your sales to replace it.