Page 1 of 1
Smartto Motor Tool not reading all settings
Posted: Sun Mar 29, 2020 3:21 pm
by jbalat
I downloaded the tool from here
https://github.com/Geeetech3D/Smartto-T ... plications
unfortunately only some of the fields are read in while others are still blank
I want to update the Jerk and Acceleration but the Tool does not work and M503 does not return anything either
I have the 1.37 firmware
Please help
Thanks
John B
Re: Smartto Motor Tool not reading all settings
Posted: Mon Mar 30, 2020 10:53 am
by William
Re: Smartto Motor Tool not reading all settings
Posted: Mon Mar 30, 2020 2:05 pm
by jbalat
Hi William unfortunately this did not help
It will not read the settings I want, so I am not confident to try and write my new settings. Is there another way to write the acceleration and jerk settings please ?
- smarto.png (135.56 KiB) Viewed 7850 times
Re: Smartto Motor Tool not reading all settings
Posted: Mon Mar 30, 2020 2:09 pm
by William
Hi, you can try use the screen.
Re: Smartto Motor Tool not reading all settings
Posted: Mon Mar 30, 2020 2:44 pm
by jbalat
Really ? How ?
Re: Smartto Motor Tool not reading all settings
Posted: Tue Mar 31, 2020 5:43 pm
by jbalat
So I updated to 1.38 luckily there were no issues
Now the motor tool 1.2 is working except for travel acceleration
I made my changes and pressed Apply. Looks like values have been saved. Will print something soon to test !
new settings below.
- motor_set1.png (56.93 KiB) Viewed 7827 times