Geeetech

Hi,

My A30 gives me lots of pain:

since I flashed to latest firmware with the tool (board an LCD):

the info page on the printer stays blanck of info:

serial number "nothing"
firmware version "nothing"

etc

I either don't manage to level my bed using LCD, printer won't store my settings

Actually, printer won't find any gcode file I put on the micro sd card.


Thanks for help

François.

PS I know my hardware version is 3.6

Hi, you can download the firmware,
Then upload it using the firmware toolkit,
Upload the m file first,
Then insert the SD card into the card slot,
Then upload the s file.
For specific operations, you can refer to: viewtopic.php?f=20&t=68694