Page 1 of 1
Re: Printing multiple colours
Posted: Sun Sep 22, 2019 6:20 pm
by _kaktus_
Hello.
If you do not have a mixer head, you can hold the printout until the filament is replaced.
Re: Printing multiple colours
Posted: Sat Oct 12, 2019 8:31 pm
by vdb5590
Okay, so the mixer head is something that can be mounted on the A30, right?
Re: Printing multiple colours
Posted: Sat Oct 12, 2019 8:41 pm
by _kaktus_
Hi.
Yes.
It's a different component.
Check out the A30M.
You will see what components you need in case you want to make a modification. The mixing head is not everything.
Re: Printing multiple colours
Posted: Thu Oct 17, 2019 12:29 am
by vdb5590
Okay, thanks for the explanation, I'll read more on this topic!
Re: Printing multiple colours
Posted: Thu Oct 17, 2019 1:23 am
by _kaktus_
Hi.
Greetings and good luck with your experiments.