BLtouch error
BLtouch error
Hello, I recently bought A20M geeetech. I did everything the manuals says. I upgraded the firmware because the port cannot be read. After upgrading my LCD went blank. I tried to upgrade using Arduino and now the configurations are all messed up xyz axis, height and levelling are not in proper places. And when I try to connect to computer software, it says BLtouch error. Can you please help me.
Re: BLtouch error
Hi, you can refer to this:http://www.geeetech.com/forum/viewtopic ... 09&t=61933
and about Bltouch you can refer to this:http://www.geeetech.com/wiki/index.php/ ... ing_Sensor
and about Bltouch you can refer to this:http://www.geeetech.com/wiki/index.php/ ... ing_Sensor
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: BLtouch error
BLtouch error, We are giving you the most effective device. I never show demand about those things about which i never know. I would like to handle best dissertation here because it help me to save device and remove error.
-
LaurendeSouza
- Posts: 2
- Joined: Wed Aug 04, 2021 4:42 pm
Re: BLtouch error
It's nice to meet here all the experts and happy to read your point of view. Thank you for taking time and discussed with us.
Lauren,
https://www.cvfolks.co.uk/
Lauren,
https://www.cvfolks.co.uk/
Re: BLtouch error
I have the same problem with a gt2560 rev a and anet 1.FirstCallOnline0 board. I'm using a 3d touch and it properly works until the print is finished. Once I start another print I get a STOP error with the same message. I have to manually pull the probe down and reset the printer in order to get it working again.