A30 motor currents for X,Y,Z axis motors

Post Reply
Seriogal
Posts: 10
Joined: Sat Mar 09, 2019 7:42 pm

A30 motor currents for X,Y,Z axis motors

Post by Seriogal » Sun Jun 16, 2019 3:50 am

Decided to change stepper drivers in my A30. To properly adjust them it is needed to know stepper motor models or nominal current of these motors. Can anyone help me with this information? Thanks!
Top
User avatar
Sa1Wales
Posts: 52
Joined: Fri Feb 01, 2019 4:20 am

Re: A30 motor currents for X,Y,Z axis motors

Post by Sa1Wales » Mon Jun 17, 2019 7:23 am

This video says best is around 0.6 volts, his were set at nearly double that at defualt not sure if it will help but added the video as any reply is better than no replys. Hope its what your asking about.

Peter Homer made the video and seems informative.

https://www.youtube.com/watch?v=p_TpiZSebxw

Steve.
Top
Post Reply

Return to “Geeetech A30 Series”