TMC2208
TMC2208
Hi guys,
I have a problem with my A30 and maybe you will have the answer...
I just changed the drivers to TMC2208 and this sh!*t is briliant !!! but, somehow I can't make it work on the X...
Y,Z and E working great, but the X don't want to lock or move.
When I home the X, it's working, but refuse to move from there.
I tried Vref, and changing to another TMC2208 but nothing.
Back to the A4988 and the X is live again.
Any ideas????
BTW, the board is Gtm32 pro vd
I have a problem with my A30 and maybe you will have the answer...
I just changed the drivers to TMC2208 and this sh!*t is briliant !!! but, somehow I can't make it work on the X...
Y,Z and E working great, but the X don't want to lock or move.
When I home the X, it's working, but refuse to move from there.
I tried Vref, and changing to another TMC2208 but nothing.
Back to the A4988 and the X is live again.
Any ideas????
BTW, the board is Gtm32 pro vd
Re: TMC2208
GTM32 Pro ? Normally the A30 have the mini, anyway look here
https://www.geeetech.com/forum/viewtopi ... 92&t=61761
https://www.geeetech.com/forum/viewtopi ... 92&t=61761
Re: TMC2208
Yes, I got it with the Pro.
I already removed the bridge and update firmware, but it's the same problem
I already removed the bridge and update firmware, but it's the same problem
Re: TMC2208
Hey
Could you tell us your fw version?
You need to tell us your PSU type also(12V or 24V).
Could you tell us your fw version?
You need to tell us your PSU type also(12V or 24V).
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: TMC2208
Hardware version 3.2 24v
Latest firmware.
Latest firmware.
Re: TMC2208
The latest firmware version is:V1.37.58.You need to update it to this firmware version then test it.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-
- Posts: 2
- Joined: Sat Oct 20, 2018 2:52 am
Re: TMC2208
I have the same problem. HW version 2.1, 24V PSU.
When I upgrade to FW 57 or 58, X works until I execute G28, or G28 X. After homing - X axis is dead.
On 56 it seems to be working (with TMC2208 drivers) but I am worried as the linked thread says I need to have newer firmware.
I measured voltage on X axis driver while homing - there are no drops or changes, it is same after homing but stepper won't move anymore.
When I upgrade to FW 57 or 58, X works until I execute G28, or G28 X. After homing - X axis is dead.
On 56 it seems to be working (with TMC2208 drivers) but I am worried as the linked thread says I need to have newer firmware.
I measured voltage on X axis driver while homing - there are no drops or changes, it is same after homing but stepper won't move anymore.
-
- Posts: 2
- Joined: Sat Oct 20, 2018 2:52 am
Re: TMC2208
Actually after some printing, issue happens in V56 too. For now I will just remove G28 and manually make sure that axes are homed before every print. I will upgrade again to 58. If you need me to test anything (test builds), you can contact me (I am also in group on FB, you can message me).
Re: TMC2208
Thanks for your feedback,we will check it'goranobradovic wrote: ↑Sat Nov 17, 2018 4:35 amI have the same problem. HW version 2.1, 24V PSU.
When I upgrade to FW 57 or 58, X works until I execute G28, or G28 X. After homing - X axis is dead.
On 56 it seems to be working (with TMC2208 drivers) but I am worried as the linked thread says I need to have newer firmware.
I measured voltage on X axis driver while homing - there are no drops or changes, it is same after homing but stepper won't move anymore.
-Keep your mind and try to test it.
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: TMC2208
Hardware Version 3.2 have the GT32 Por Bord and need a modified Firmware version for TMC's