Geeetech

Hello,
after some successful printings now the extruder isn't work (heating) anymore. The heating is out of order.
Cable/Connector are ok, no visible damages. How can I detect the source of failure. Is a wiring diagramm and/or measured values available?
Thanks in advance.

HAD HE SAME PROBLEM ON MY E180
EVERYTHING ELSE IS OK
IT LOOKS THE HEATING POWER UNIT (MOSFET) GAVE UP
I STILL WAIT GEEETECH ANSWER

Maybe refer to this
viewtopic.php?f=19&t=17039

I am having a similar issue. I was printing fine but then each print would require a higher temperature in order to print otherwise the filament would start grinding and skipping. I actually don't know what exactly my problem is. Maybe the hotend needs to be cleaned. I am in the process of doing that now but I don't think it is the answer. I posted a new topic requesting help or ideas but still awaiting approval by a moderator.

Geotech has an auto series to get data with the extrude with the formats to take data having registration among these responders. I have to make a report on this so I hire custom essay writing services this was the company that has famous writers among the city to work on these projects.