Page 1 of 1
The printer does not read the memory card after the last update
Posted: Sun Jan 07, 2018 10:29 am
by AlAmBrAtOr
My current problem after the latest update of 1.06.09 memory card did not work
I replaced more than one memory card but the printer did not read the memory card
How can I Downgrade the version?
Re: The printer does not read the memory card after the last update
Posted: Mon Jan 08, 2018 6:05 pm
by William
Whether you can upload the pictures to forum-- - "About" in your printer LCD display?
Re: The printer does not read the memory card after the last update
Posted: Tue Jan 09, 2018 11:24 am
by AlAmBrAtOr
You can find images on this link
https://drive.google.com/drive/folders/ ... sp=sharing
Also, I can not add the printer to EasyPrint Mobile
Re: The printer does not read the memory card after the last update
Posted: Tue Jan 09, 2018 2:26 pm
by William
You should upload the firmware via USB cable again.
Select "only mainboard" and then update it
- A30updata.png (38.76 KiB) Viewed 9205 times
We have unbound this printer and it's all our fault.We need to test the wifi modules before it arrives in your hand.Please forgive us!
Re: The printer does not read the memory card after the last update
Posted: Tue Jan 09, 2018 3:01 pm
by AlAmBrAtOr
Also did not work :(
https://drive.google.com/open?id=1kmvQ1 ... -YtTXp90vF
Believe me
The previous update was working correctly 1.06.07
How can I restore the system 1.06.07 ???
Re: The printer does not read the memory card after the last update
Posted: Wed Jan 10, 2018 12:48 am
by Yves
Yes, you are right. I have the same problem. I also need the original firm war again, not the download provided on the download section
Re: The printer does not read the memory card after the last update
Posted: Wed Jan 10, 2018 6:48 pm
by William
You should join our facebook group, you will get help at fast.
Geeetech 3D Printer User Club (OFFICIAL)
https://www.facebook.com/groups/315127105604393/