A30 display working but no touch
-
sylwester_r
- Posts: 9
- Joined: Thu May 21, 2020 9:02 pm
Re: A30 display working but no touch
I flashed only the latest firmware for display delivered with latest A30 firmware, so I think is should be working. Can you tell me what best slicer to use? When setting up Cura 4.6.1 or PrusaSlicer for this printer the print is not centered. Also I am not sure if I should configure PrusaSlicer that this is Repetier or Marlin GCode printer? Can you provide me the supported GCode set your firmware is compatible with?
Re: A30 display working but no touch
Hi，Repetier-Host is the recommended slicing software. You can try to print this file:
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: A30 display working but no touch
Hi Sylwester,
My new lcd screen works very well now ,
when i installed it froze but the next day it worked very well.
My new lcd screen works very well now ,
when i installed it froze but the next day it worked very well.