LCD display problem
Re: LCD display problem
LCD failed upgrade
- Attachments
-
- LCD failed upgrade
- f.JPG (92.46 KiB) Viewed 5943 times
Re: LCD display problem
inside control box
- Attachments
-
- LCD conection
- e.JPG (136.68 KiB) Viewed 5943 times
-
- back LCD
- c.JPG (231.2 KiB) Viewed 5943 times
-
- control box
- a.JPG (194.12 KiB) Viewed 5943 times
Re: LCD display problem
lcd connction
- Attachments
-
- lcd connection
- d.JPG (128.12 KiB) Viewed 5943 times
Re: LCD display problem
Hi, This is the corresponding UI file.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
Hi,
After swiping the screen, be sure to dial out the SD card. Otherwise, it will automatically refresh the screen upon power on.
After swiping the screen, be sure to dial out the SD card. Otherwise, it will automatically refresh the screen upon power on.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
Hi, i don't understand
Re: LCD display problem
Hi, you can download this UI file and update it.
and you need to remove the SD card after the update is complete.
and you need to remove the SD card after the update is complete.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Re: LCD display problem
this one ?
- Attachments
-
- the right UI ?
- Capture.JPG (56.6 KiB) Viewed 5933 times
Re: LCD display problem
I update the UI first or the firmware.
- is this the right update ?
- firmware update.JPG (53.26 KiB) Viewed 5932 times
Re: LCD display problem
Hi,This firmware is incorrect.The following are the correct firmware and Ui files:
Motherboard firmware: A30_M07_V0_01.bin (CRC32: 4E6ED0BA)
LCD screen firmware: A30_S02_V0_01.bin (CRC32: D65698E0)
1. First burn the motherboard firmware: use the "firmware_tool_V2.0" burning tool for burning, and it must be the firmware_tool tool of version V2.0 or later.
2. If the screen is still black, burn the screen firmware: use the "firmware_tool_V2.0" burning tool to burn.
3. If the screen is still black, refresh the UI: save the system in the UI file to the SD card, insert the Sd card into the card slot, the screen starts to refresh, the refresh is completed, and the Sd card is pulled out.
LCD screen firmware: A30_S02_V0_01.bin (CRC32: D65698E0)
1. First burn the motherboard firmware: use the "firmware_tool_V2.0" burning tool for burning, and it must be the firmware_tool tool of version V2.0 or later.
2. If the screen is still black, burn the screen firmware: use the "firmware_tool_V2.0" burning tool to burn.
3. If the screen is still black, refresh the UI: save the system in the UI file to the SD card, insert the Sd card into the card slot, the screen starts to refresh, the refresh is completed, and the Sd card is pulled out.
-Keep your mind and try to test it.
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!