hello, if I print with my A30 printer and my part with Cura 4.1 slice, then it is 0.9mm too small after printing warm or cold measured. I use PLA on a heating bed with 50 or 60 degrees Celsius. In the component height it is perfect, only the diameter is not right.
scaling with Cura is not an option because I have many print files and want to use them on different printers. if I use scaling in Cura, I have to do that for each printer. it's stupid. if I print something that is 269mm in diameter, then it has to be 269mm in diameter (plus minus 0.1mm is ok for me). I am already glad that the printer prints the parts really round.
how can I adjust the printer to print the parts correctly in size? small parts like 20x20x20 mm or 30x30x30 mm are great, the problem is with large parts.
large parts are printed too small
Re: large parts are printed too small
I'm a beginner, but I'm going to work my way into it.