Geeetech A30 Cura Profiles

Post Reply
User avatar
Sneakers
Posts: 38
Joined: Thu Oct 18, 2018 1:32 am

Geeetech A30 Cura Profiles

Post by Sneakers » Fri Oct 26, 2018 10:23 pm

Hi does anyone have a Cura Profile they would like to share? I saw a reference that there are Cura profiles on facebook but I don't have and don't want facebook :cry:

I found these posts:
A30-Cura-profile https://www.geeetech.com/forum/viewtopic.php?t=60652
&
How to add the printer Geeetech A30 to Cura: https://www.geeetech.com/forum/viewtopic.php?p=85788

However, they don't print well. Printing the demo files works great. I also get good results in Cura by using the profile for the CR-10.
Top
User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Geeetech A30 Cura Profiles

Post by William » Sat Oct 27, 2018 5:45 pm

Maybe you can refer the attached file
Attachments
Geeetech A10 CURA3.2.zip
(1.42 KiB) Downloaded 638 times
-Keep your mind and try to test it. :)
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
Top
dogmatic69
Posts: 11
Joined: Sat Oct 06, 2018 2:27 am

Re: Geeetech A30 Cura Profiles

Post by dogmatic69 » Thu Nov 01, 2018 2:37 am

I just used the defaults under new and set the table size + marlin g-code. Works fine, not sure why everyone is on about loading a fancy profile...

I've now had a look a the files and there is nothing extra in there.

Your issue is almost certainly slicer issues rather than machine profile. Use the built in PLA settings, I changed bed tep to 80 and print to 200. Printed perfect out the box just like that.
Top
Post Reply

Return to “Geeetech A30 Series”