Hi,
I have successfully updated my A30M to an A30T(info shows A30T). Only the display UI files don't show the correct parts(mixing interface with 3 extruder) of an A30T.
I follow the step by step guide at the firmware on the side.omegle xender
-> Put the system and the A30T_S02_V1_01.bin to root card.
-> add a config.txt (with boot:1;bin_name:A30T_S02_V1_01.bin;) to root of sd card
-> start printer again
-> nothing happen
I checked the usb port on the side and directly on the mainboard.
What can I do? Any helps?
Upgrading from A30M to A30T - No UI upgrading?
-
AlexanderMason
- Posts: 5
- Joined: Wed Jun 17, 2020 9:06 pm
Re: Upgrading from A30M to A30T - No UI upgrading?
Hi, SD card should be put in
to this card slot.
- QQ图片20200622143055.png (769.39 KiB) Viewed 2915 times
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!