Smartto Motor Tool not reading all settings

jbalat · Post by **jbalat** » Sun Mar 29, 2020 3:21 pm

I downloaded the tool from here
https://github.com/Geeetech3D/Smartto-T ... plications

unfortunately only some of the fields are read in while others are still blank

I want to update the Jerk and Acceleration but the Tool does not work and M503 does not return anything either
I have the 1.37 firmware

Please help

Thanks
John B

Post by **William** » Mon Mar 30, 2020 10:53 am

Hi, you can refer to this:viewtopic.php?f=17&t=60639&p=82054#p82054

jbalat · Post by **jbalat** » Mon Mar 30, 2020 2:05 pm

Hi William unfortunately this did not help

It will not read the settings I want, so I am not confident to try and write my new settings. Is there another way to write the acceleration and jerk settings please ?

: smarto.png (135.56 KiB) Viewed 7846 times

Post by **William** » Mon Mar 30, 2020 2:09 pm

Hi, you can try use the screen.

jbalat · Post by **jbalat** » Mon Mar 30, 2020 2:44 pm

Really ? How ?

jbalat · Post by **jbalat** » Tue Mar 31, 2020 5:43 pm

So I updated to 1.38 luckily there were no issues

Now the motor tool 1.2 is working except for travel acceleration
I made my changes and pressed Apply. Looks like values have been saved. Will print something soon to test !
new settings below.

: motor_set1.png (56.93 KiB) Viewed 7823 times

Geeetech

Smartto Motor Tool not reading all settings

Smartto Motor Tool not reading all settings

Re: Smartto Motor Tool not reading all settings

Re: Smartto Motor Tool not reading all settings

Re: Smartto Motor Tool not reading all settings

Re: Smartto Motor Tool not reading all settings

Re: Smartto Motor Tool not reading all settings