Hard point on z axi

Briciou62500 · Post by **Briciou62500** » Tue Sep 17, 2019 2:41 am

Look the screw.

Post by **William** » Tue Sep 17, 2019 9:08 am

OH, if the one shown now is the same as the one you provided, you need to fix it.

Briciou62500 · Post by **Briciou62500** » Tue Sep 17, 2019 2:38 pm

What should I fix, I do not understand well?

In the photo, the 2 new support (front and back) are installed, they are new. In fact I have the impression that the hole of the support falls before the hole of the wheel the support should I think to come more to the right. But that can not be solved if the geeetech A30?

Post by **William** » Tue Sep 17, 2019 3:14 pm

Installation location you can refer to:

: P90917-151130.jpg (329.02 KiB) Viewed 7018 times

Briciou62500 · Post by **Briciou62500** » Tue Sep 17, 2019 4:16 pm

My screw is more longer. No ?

Post by **William** » Tue Sep 17, 2019 5:16 pm

Hi，Do you remember how you removed it?
You need to fix it with a screw.

Briciou62500 · Post by **Briciou62500** » Tue Sep 17, 2019 5:58 pm

No, I thought the bearing screws were all the same size.

Post by **William** » Tue Sep 17, 2019 6:06 pm

Oh,Can it be fixed now?
I am not very clear about what you mean.

Briciou62500 · Post by **Briciou62500** » Tue Sep 17, 2019 6:27 pm

I'm at work, 1 hour from home

Tonight, I'll see to redo pictures for you to understand better.

Geeetech

Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi

Re: Hard point on z axi