How do I go about getting this replaced? The printer is less than 3 weeks old.
- A30 Nozzle stopped heating.
- IMG_0514.jpg (66.46 KiB) Viewed 4090 times
A30 Nozzel broke
A30 Nozzel broke
I have just gotten the printer to start actually printing correctly, then I get a stop of print due to the nozzle to stop heating with an error.
How do I go about getting this replaced? The printer is less than 3 weeks old.
How do I go about getting this replaced? The printer is less than 3 weeks old.
Re: A30 Nozzel broke
I got this issue actually a couple of times with different nozzles.
I dont know what causes this problem but I always got it when I used Cura for a longer period of time without restarting Cura and the printer.
After the restart the issue is gone for quite a while.
What Slicer do you use?
I dont know what causes this problem but I always got it when I used Cura for a longer period of time without restarting Cura and the printer.
After the restart the issue is gone for quite a while.
What Slicer do you use?
Re: A30 Nozzel broke
Hi, You may want to check if the nozzle of your nozzle is fully connected
and then check the resistance of the thermistor.
and then check the resistance of the thermistor.
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!