Page 1 of 1
New firmware for metal nozzle
Posted: Sun Aug 23, 2020 4:21 am
by MrWW
There is a new firmware 2.0XXX for metal nozzle out. Im a little bit irritated. I think I have a ceramic nozzle, but where to get a metal nozzle for e180 mini. And what is the advantage of it? Or is it only a product improvement for a newer generation of E180s. Please enlighten me!
Greetings
Re: New firmware for metal nozzle
Posted: Mon Aug 24, 2020 2:08 pm
by William
Hello, if you want to buy a metal nozzle, you can contact customer service to purchase.
There is no difference between these two nozzles in normal use.
Re: New firmware for metal nozzle
Posted: Thu Dec 24, 2020 8:06 pm
by sergiolotts063
MrWW wrote: ↑Sun Aug 23, 2020 4:21 am
There is a new firmware 2.0XXX for metal nozzle out. Im a little bit irritated. I think I have a ceramic nozzle, but where to get a metal nozzle for e180 mini. And what is the advantage of it? Or is it only a product improvement for a newer generation of E180s. Please enlighten me!
Greetings
there is no difference at all in the use. So you can use it as before
Re: New firmware for metal nozzle
Posted: Fri Jul 23, 2021 2:12 pm
by Gould584
I had been getting better and better prints with the stock hotend but it was time to upgrade. I bought an all metal hotend and metal creality upgrade kit with a metal extruded and Capricorn tubing. Is there anything that I should do in the programming to let printer know that it’s not the same anymore?
TargetPayandBenefits Login