Can't print from PC

Post Reply
inkwizitiv
Posts: 6
Joined: Sat Jul 07, 2018 1:03 am

Can't print from PC

Post by inkwizitiv » Sat Jul 07, 2018 1:09 am

I connect to EasyPrint 3d through usb lead the printer makes a couple of bleeps but won't print only works on tf card any ideas please
Top
Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Can't print from PC

Post by Gingko » Sat Jul 07, 2018 5:35 pm

Have you set up the baud rate to 115200?
Top
inkwizitiv
Posts: 6
Joined: Sat Jul 07, 2018 1:03 am

Re: Can't print from PC

Post by inkwizitiv » Sat Jul 07, 2018 7:12 pm

Got it to connect now with an updated version but when I send a job Easyprint 3d just shuts down I think I have bought myself a nightmare!
Top
Gingko
Site Admin
Posts: 230
Joined: Tue Apr 24, 2018 10:43 am

Re: Can't print from PC

Post by Gingko » Mon Jul 09, 2018 3:09 pm

Is the Easyprint software the newest version V1.1.7?
Will there be the same problem when using other slicer software? Try repiter host.
Top
inkwizitiv
Posts: 6
Joined: Sat Jul 07, 2018 1:03 am

Re: Can't print from PC

Post by inkwizitiv » Mon Jul 09, 2018 4:44 pm

Yes it is the latest but I have tried both I'll try Repitier
Top
Post Reply

Return to “Geeetech E180 Mini”