i3 Pro C heat bed stopped heating/temping
Posted: Tue Apr 18, 2017 4:39 am
Hi
Finally managed to resolve extruder issues - now have a new issue with the bed.
On start-up the bed is showing as 0/0 whereas it previously showed room temp and heated up ok. Now no temp recorded and no heating going on.
I switched the thermistor from Ext 2 to heatbed and temp showed correctly (room temp)
Any ideas?
Finally managed to resolve extruder issues - now have a new issue with the bed.
On start-up the bed is showing as 0/0 whereas it previously showed room temp and heated up ok. Now no temp recorded and no heating going on.
I switched the thermistor from Ext 2 to heatbed and temp showed correctly (room temp)
Any ideas?