Geeetech

= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Hello,
Bonjour,

You can find the original text translated into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte originale en français.

Pour une imprimante 3D delta Geeetech 301 (M301), quel est le type exact de barre de rupture de chaleur 1.75mm J-Head V5 V6 HotEnd ?

Ils sont avec ou sans Teflon ?

Pourriez-vous aussi nous fournir vos numéros de produit de remplacement pour cette pièce ?

Exemple :

https://www.geeetech.com/barrel-for-all ... p-938.html

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

For a 3D delta Geeetech 301 (M301) printer, what is the exact type of 1.75mm J-Head V5 V6 HotEnd?

Are they with or without Teflon?

Could you also provide us with your replacement product numbers for this part?

Exemple :

https://www.geeetech.com/barrel-for-all ... p-938.html

Cordially,

Friend René
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

Hello William,
Bonjour William,

You can find the original text translated into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte originale en français.

Pour une imprimante 3D delta Geeetech 301 (M301), quel est le type exact de barre de rupture de chaleur 1.75mm J-Head V5 V6 HotEnd ?

Ils sont avec ou sans Teflon ?

Pourriez-vous aussi nous fournir vos numéros de produit de remplacement pour cette pièce ?

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello William,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

For a 3D delta Geeetech 301 (M301) printer, what is the exact type of 1.75mm J-Head V5 V6 HotEnd?

Are they with or without Teflon?

Could you also provide us with your replacement product numbers for this part?

Cordially,

Friend René