A few questions before purchasing

[stagbeetle]

Hi,

I'm from a wood/cnc hobby background but interested in the 301 delta, or possibly the m201.

I can't figure out if the filament ratio can be controlled from the G-code rather than the LCD mixer?

I can't see the GTM32 in your driver board section - is it under a different section or simply too new?

What I'd love to see is some reference models you print with each of your products so I can get a clearer idea of the differences.

The shipping from your site is about £60, pushing the price above ebay et al - do you support ebay shop purchases as well as you do direct purchases - I'm thinking especially of faults? I'm going to wait if you put a printer on 'special' this weekend but how likely is it that the newer models go 'on special'?

Thanks,

[William]

Hi,
1.As far as i know,the ratio can only be controlled from the LCD.
2.The GTM32 is not open source,and we didn't sell it seperately so you can't find it.
3.About the models,you can see the two files i attached.

中型（更新）M201 1200(英文)整体.zip

(3.26 MiB) Downloaded 529 times

专题页(最终版1200).zip

(3.32 MiB) Downloaded 493 times

4.Yep,we also sell it on eBay store.

[stagbeetle]

Thanks - if it's only the LCD then I don't understand how the heart bracelet or globe can be done? For the models, what I meant is some real printed objects (and videos showing them being printed?) hopefully showing the extremes of what each printer is capable of.

[William]

some videos about them:
https://www.youtube.com/watch?v=pRj4xd0C1SY
https://www.youtube.com/watch?v=WUUELS4Zfhc
https://www.youtube.com/watch?v=_fO4kzoTOps

[greeffbf]

Geeetech can be such a great company if they would just listen to the customers, The GTM32 board could be market leaders if they could sell separate, would stop making excuses and make firmware open or change to user requests.

[Lami René]

Bonjour greeffbf,

Je suis d'accord avec vous, je partage votre point de vue !

De plus, ils se sont basés sur des produits Open Source pour concevoir leurs produits, et il semble qu'ils ne respecteraient pas la licence, mais de rendre Open Source le micrologiciel "firmware" les replaceraient dans le bon chemin et ferait grand plaisir à leurs clients et pourrait les fidéliser !

Cordialement,

L'ami René

[greeffbf]

Bonjour greeffbf,

Je suis d'accord avec vous, je partage votre point de vue !

De plus, ils se sont basés sur des produits Open Source pour concevoir leurs produits, et il semble qu'ils ne respecteraient pas la licence, mais de rendre Open Source le micrologiciel "firmware" les replaceraient dans le bon chemin et ferait grand plaisir à leurs clients et pourrait les fidéliser !

Cordialement,

L'ami René

I agree