Geeetech

Hello,

I have heard about your new product Azteeg 3D printer controller recently. What features does it offer for the users? Would you please explain its advantage?

Thanks in advance


Felix

felixoyer wrote:Hello,

I have heard about your new product Azteeg 3D printer controller recently. What features does it offer for the users? Would you please explain its advantage?

Thanks in advance

Hi,
The features：
Compatible with Sprinter, Marlin, Repetier, others.
High current capacity connectors and PCB traces.
Mosfet control for 1 extruder and 1 hotbed
Extra PWM control for small fan or LEDs
3 end stops and 2 thermistor inputs
Fast acting blade fuse
Both right angle and vertical connector sets included
Lots of LEDs, PWR, hot end and hot bed
Advantage：
The Azteeg is based on Sanguino/Sanguinololu and is compatible with most Arduino based firmware(Sprinter,Marlin,Repetier, plus others.). It is pin to pin compatible with the Sanguinololu with the addition of a FAN PIN. The Azteeg features mostly SMT parts to ease production and reduce cost.

Hey William,

Thank you for your response and for sharing the complete features about Azteeg. But, I would like to know about whether I will have issues with the continuous use or when it gets hotter. Because, I will have continuous usage of it.

Thanks for help

felixoyer wrote:Hey William,

Thank you for your response and for sharing the complete features about Azteeg. But, I would like to know about whether I will have issues with the continuous use or when it gets hotter. Because, I will have continuous usage of it.

Thanks for help

Hi,
The board is so old that i know about a little about it...You can contact our sales(sales@geeetech.com) for more info if you're interested in.

I know Geeetech reliability but at this time my friend suggests me to check your product. I need a 3D print controller, so I decide to check their reliability or product. I need all information or configuration for that product. Please let me know the contact methods so that I can buy this product.

Thanks

Fariaj3