Page 1 of 1
Extruder 1 and Extrude 3
Posted: Fri Mar 11, 2016 9:35 pm
by fulcrum
I have this problem
in X0 Y0 Z0 the extruder are at the same height (touch al the 2)
at X -54.7 Y 54 Z0 extruder 1 touch and extruder 2 does not touch
at X 54.7 Y -54 Z0 extruder 1 does not touch and extruder 2 touch
what's the problem?
Re: Extruder 1 and Extrude 3
Posted: Fri Mar 11, 2016 10:45 pm
by Mark
seems your nozzle is in a convex plane, have you adjusted the "detla_radius" offset? And you can leave the 2nd hotend along, first to make sure the hotend1 is the same height to all the 3 coordinates, and then level the 2 hotends, that might be better.
Re: Extruder 1 and Extrude 3
Posted: Wed Dec 07, 2016 4:16 pm
by Lami René
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
Hello fulcrum,
Bonjour fulcrum,
You can find the original text into English following this original French text.
Vous trouverez le texte original traduit en anglais à la suite du présent texte originale en français.
Est-ce que vous réussissez de belles impressions avec votre imprimante Geeetech ?
Cordialement,
L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello fulcrum,
Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!
Do you make beautiful prints with your Geeetech printer?
Cordially,
Friend René
= = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =