Documentation Fix: i3 M201 Extruder mounting incorrect
Posted: Tue Feb 16, 2016 9:45 pm
The recent shipped extruders with the vents do not fit anymore like shown in the instruction. There is a collision between the fan and the z-axis threaded rod.
There are two ways to get rid of the problem. One is just to remove the fan because in this position there is no cooling required. Neither for the filiament, nor for the motor.
Or change the length of the threaded rods, so there is no collision anymore
There are two ways to get rid of the problem. One is just to remove the fan because in this position there is no cooling required. Neither for the filiament, nor for the motor.
Or change the length of the threaded rods, so there is no collision anymore