Page 1 of 1
Re: Smooth rod bended
Posted: Sat Feb 14, 2015 9:15 am
by Admin
Maybe they are broken during transportation, because we had all the parts checked before sending. Please take a picture and send it to me.
We will resend those broken parts as fast as we can.
And we apologize for your trouble.
Re: Smooth rod bended
Posted: Mon Feb 16, 2015 9:40 am
by Admin
It takes 5-10days. We are sorry for having you waited. Please be patient.
Re: Smooth rod bended
Posted: Mon Mar 09, 2015 1:28 pm
by hanji12
I´d like you send me a brand new rod and linear bearing as soon as posible.It's a big inconvenience for me because I have a date to deliver my work. Thank You..
Re: Smooth rod bended
Posted: Mon Mar 09, 2015 1:43 pm
by zhangxueyou
Hi watson,
Please tell me where you buy the printer, and your order number.
Re: Smooth rod bended
Posted: Tue Jul 14, 2015 4:01 am
by Mr_Fixit
I had a similar problem where the linear bearings would not go on the smooth rods, the diameter of the smooth rods were out of spec and too big for the bearings, luckily I had a lathe at my disposal and was able to machine the rods down to a usable diameter.