Firmware requirement

[karthi.rwth]

Can anyone mail me the firmware file for the following Specifications:

Build volume: 200 x200x180mm
Layer resolution: 0.1-0.3mm
Positioning Precision: 0.1-0.3mm
Filament diameter: 1.75mm
MK8 extruder
Nozzle diameter: 0.3mm, 0.35mm, 0.4 mm, 0.5mm
Filament type: ABS/ PLA/Flexible PLA/ Wood /Nylon

Mechanical:
Body: Acrylic plate of 8 mm thickness (black)
Build Platform: Borosilicate glass + MK2A heat bed
Motor driver board - A4988
Control board - Sanguinololu (Standard

[Soadyheid]

The printer firmware just interprets the GCode file sent to the printer, the items you mention; build size, layer resolution, filament size, nozzle diameter, etc, are part of your slicing software configuration therefore nothing to do with firmware, which should (hopefully!) be pre-installed

Play Bonny!

Soadyheid