Mecreator 2 overheat for many minutes ?

Post Reply
vogty
Posts: 3
Joined: Sun Dec 18, 2016 8:58 pm

Mecreator 2 overheat for many minutes ?

Post by vogty » Wed Apr 26, 2017 1:31 am

hi, if i try to print, the nozzle overheat for many minutes. for example i say 190 grad and the printer heats up to 230 and after many minutes (10 or so) the temperature cools down and the printer starts. The bed temperature is ok dont overheat. What can i do that the printer dont overheat ?

Thanks for your answer (sorry for my bad english i am german)

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Mecreator 2 overheat for many minutes ?

Post by William » Thu Apr 27, 2017 5:16 pm

Hi,I wanna know how do you set the temp to control the printer,LCD panel or Repetier?
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

vogty
Posts: 3
Joined: Sun Dec 18, 2016 8:58 pm

Re: Mecreator 2 overheat for many minutes ?

Post by vogty » Thu Apr 27, 2017 8:00 pm

I have test both, with repetier i said 218 for example and the printer overheats 235 and after 10 minutes or so the temp goes down an the printer begin, what can i do to resolve the problem ? Or what can i test ?

User avatar
William
Site Admin
Posts: 6340
Joined: Tue Jun 07, 2016 9:38 am

Re: Mecreator 2 overheat for many minutes ?

Post by William » Fri Apr 28, 2017 10:42 am

vogty wrote:I have test both, with repetier i said 218 for example and the printer overheats 235 and after 10 minutes or so the temp goes down an the printer begin, what can i do to resolve the problem ? Or what can i test ?
Hi, I want to know where do you know the temp of 235°,from LCD panel?Have you measured the actual temperature of the nozzle with a thermometer?I think thermistor of extruder may be broken.
-Keep your mind and try to test it. :)
-Everything will be fun!-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!

vogty
Posts: 3
Joined: Sun Dec 18, 2016 8:58 pm

Re: Mecreator 2 overheat for many minutes ?

Post by vogty » Sun Apr 30, 2017 4:07 pm

yes the panel said the temperature. the temperature is really to hot. the pla melt to much. when the temp goes down the printer prints good and hold the correct temperature.

Post Reply