Geeetech

Posted: **Wed Dec 11, 2019 6:02 pm**

Hi

I need to pause a 3d print to place a nut in to the print

what is the best way of pausing the print

The file I'm using is https://www.thingiverse.com/thing:3202223

Thanks
Wayne

Posted: **Wed Dec 11, 2019 6:10 pm**

Hi，You can use the LCD screen to pause printing.

Posted: **Wed Dec 11, 2019 6:24 pm**

Thank but..
Using the pause on the LCD is not the best as I will have to be in the room at the time that is needs to be pause

Wayne

Posted: **Wed Dec 11, 2019 8:17 pm**

Hi I have found out how to pause with Cura

https://all3dp.com/2/cura-pause-at-height-how-to-do-it/

Thanks

Posted: **Fri Dec 13, 2019 2:53 am**

Hello.

You can use the standard G4 command. However, I don't know if your printer's firmware supports it. Perform tests.

Geeetech

how to add pause in to gcode

how to add pause in to gcode

Re: how to add pause in to gcode

Re: how to add pause in to gcode

Re: how to add pause in to gcode

Re: how to add pause in to gcode