Good morning, I have almost a week with the printer A10M the first impressions was very good, but lately I have been having a problem with the temperature of the nozzle, when the piece starts the temperature is 200-210 for the PLA but as soon as a time goes down to 75 which makes the impression is wrong, the program I use to set the piece is CURA and I already check the printing parameters and they are fine, I look for information but I can not find anything, I hope I can have an opinion to what may be happening.
Thank you
Temperature error
Re: HELP¡¡ temperature error
Hi, I hope this can help you :http://www.geeetech.com/forum/viewtopic ... 19&t=17039
-Keep your mind and try to test it. 
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!
-Everything will be fun！-Support all Getech printer.
-You can ask me the questions and I will kindly reply.
-Respect others is the best way you can get help!