Geeetech

Easy Print provides all the users with online service of upgrading firmware to guarantee perfect printing performance.
The specific method is as follows:

1. Connect your GEEETECH 3D printer to the computer with the USB cable.
2. Turn the printer on.
3. In Easy Print, choose the COM port and the printer type.
4. Click ’help’> 'Update firmware'.

After clicking the [upgrade firmware] tab, a window will pop up with the information of printer type and port, the current firmware version installed, the available version and the update summary of the latest firmware. Click [update] and confirm updating, the progress bar will turn green; the firmware will be updated automatically. This process may take some time. When the upload is complete the message ‘update success’ will be displayed.
Click ‘ok’ and ‘Close’ on the windows to complete the firmware upgrade.

Hello,
Bonjour,

You can find the original text into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.

Merci pour le document !

Est-ce que vous pourriez nous indiquer les hyperliens Web pour télécharger les versions :

1) Linux :
2) Macintosh :
3) MS-Windows :

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

Thanks for the document!

Could you tell us the web hyperlinks to download the versions:

1) Linux:
2) Macintosh:
3) MS-Windows:

Cordially,

Friend René

This attachments is an Italian traslation for current version of Easyprint
Good Work

Alep wrote:This attachments is an Italian traslation for current version of Easyprint
Good Work

Thank you very much Alep.
In return for your good work, we will give you a gift. will tell you tomorrow!

what printers does this feature support? is it ALL Geeetech printers past and present?

Hi,@Uzi3L
This is what it can support so far:

i have tried this , but in the update window , it points me to another printer and com door , i have the right printer and com door selected in the other menus but here it just gives me MEcreator2/com17

@Tabasko
So did you solve it finally?

I haven't tried Creation Workshop yet because my printer is still using CNC drivers and Mach3. i found your page today.
This software is thats what i search. You've done a great thing here . Great work

Hello,
Bonjour,

You can find the original text into English following this original French text.

Vous trouverez le texte original traduit en anglais à la suite du présent texte original en français.

Merci pour le document !

Est-ce que vous pourriez nous indiquer les hyperliens Web pour télécharger les versions :

1) Linux :
2) Macintosh :
3) MS-Windows :

Cordialement,

L'ami René
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Hello,

Excuse me, I am unilingual francophone and I use Google translator to translate the texts of the forum in French and to write to you in English. Thank you for your understanding and your indulgence for these texts translated mechanically!

Thanks for the document!

Could you tell us the web hyperlinks to download the versions:

1) Linux:
2) Macintosh:
3) MS-Windows:

Cordially,

Friend René