Page 1 of 1
Prusa i3 pro W connection to pc Problem.
Posted: Mon Apr 02, 2018 10:13 pm
by JonasK.
My Problem is that My PC(windows 10) Isn't connecting with my Printer.
I had Installed Manually the Driver and Easy Print 3D, but when i go in to Easy print 3D, i can't choose a Com Port.
I can't see the Port in the Device Manager.
Re: Prusa i3 pro W connection to pc Problem.
Posted: Tue Apr 03, 2018 7:38 pm
by William
Re: Prusa i3 pro W connection to pc Problem.
Posted: Tue Apr 03, 2018 8:10 pm
by JonasK.
I had allready tried this. the problem is still there.
it hadn't helped.
Do you know some more idears?
I think this photos would help.
Re: Prusa i3 pro W connection to pc Problem.
Posted: Wed Apr 04, 2018 6:42 pm
by JonasK.
I already tried it and this time again. It is still not working.
Do you have an other Idea.
I hope The Atachments will help to explain.
[attachment=1]Screenshot (2).png[/attachment]
[attachment=2]Screenshot (1).png[/attachment]
[attachment=0]20180403_141642[1].jpg[/attachment]
Re: Prusa i3 pro W connection to pc Problem.
Posted: Wed Apr 04, 2018 9:36 pm
by JonasK.
I had made it now. It was the firewall.
Re: Prusa i3 pro W connection to pc Problem.
Posted: Wed Apr 04, 2018 10:07 pm
by _kaktus_
The device manager presents information about the incorrectly installed device.
This is the printer port.
You must try to install the driver correctly. Something has failed before.
Below is a link to download the driver straight from the manufacturer's website.
http://www.wch.cn/download/CH341SER_ZIP.html
;-D
Re: Prusa i3 pro W connection to pc Problem.
Posted: Fri Apr 06, 2018 10:01 pm
by JonasK.
It sais Code10 Problem. And in Ressoucen is only one thing changeable.