Prusa i3 pro W connection to pc Problem.

[JonasK.]

My Problem is that My PC(windows 10) Isn't connecting with my Printer.

I had Installed Manually the Driver and Easy Print 3D, but when i go in to Easy print 3D, i can't choose a Com Port.
I can't see the Port in the Device Manager.

[William]

You can refer to this post
viewtopic.php?f=21&t=60612&p=81974#p81974

[JonasK.]

I had allready tried this. the problem is still there.
it hadn't helped.
Do you know some more idears?
I think this photos would help.

[JonasK.]

I already tried it and this time again. It is still not working.
Do you have an other Idea.
I hope The Atachments will help to explain.
[attachment=1]Screenshot (2).png[/attachment]
[attachment=2]Screenshot (1).png[/attachment]
[attachment=0]20180403_141642[1].jpg[/attachment]

[JonasK.]

I had made it now. It was the firewall.

[_kaktus_]

The device manager presents information about the incorrectly installed device.

This is the printer port.
You must try to install the driver correctly. Something has failed before.

Below is a link to download the driver straight from the manufacturer's website.
http://www.wch.cn/download/CH341SER_ZIP.html

;-D

[JonasK.]

It sais Code10 Problem. And in Ressoucen is only one thing changeable.