3D Touch G29 ignoring x-axis limitation - What can I DO?

Post Reply
ervinjason
Posts: 1
Joined: Wed Mar 30, 2022 4:59 am

3D Touch G29 ignoring x-axis limitation - What can I DO?

Post by ervinjason » Wed Mar 30, 2022 5:07 am

i got a problem while adapting my firmware for my new 3DTouch sensor.

i own a geeetech i3 pro c (dual) and i successfully installed the sensor (after a few hours...)

currently i can G28 (home all axis) fine.

but with G29 (autolevel) my x-axis is going crazy and ignores my build dimensions completely:

https://www.dropbox.com/s/ojgai588y35oh ... l.mp4?dl=0

it doesn't matter if

define X_MAX_POS 180 (current profile)
or
define X_MAX_POS 130 (just testing)

the printer always moves over the limit and the belt is tortured

suggestions are welcome :-)
you can edit videos with alight motion on pc with the help of an emulator. Alight Motion is an Android app but you can use it on PC/Windows or MAC with an Android Emulator.
Top
hoadao3493
Posts: 6
Joined: Fri Dec 31, 2021 10:03 pm

Re: 3D Touch G29 ignoring x-axis limitation - What can I DO?

Post by hoadao3493 » Sun Apr 17, 2022 12:29 am

Your article is very good and useful, thank you for sharing, tdtc hopes that next time you will have more good articles to send to all readers.
Top
Post Reply

Return to “Mods And Hacks”