Quality issuses

[BubbleButt]

Hello,

I started 3D-Printing 1 week ago with a A10 (latest version).
I am having no trouble leveling the bed, my first layer is sticking to the plattform perfectly and the printed objects are close to my expectations.
But I am having problems with incosistents of my printed objects.

Does somebody of you know how to fix this? And which part of my printer / my work causes the issues?

I'm really thankfull for your help.

It didn't work to attach a picture, so I uploded it to: https://ibb.co/tC0KgwX

Best regards from germany.

[William]

Hi, you can try to reduce the print speed appropriately.
Reference range: 30-60mm/s;
Check if the z-axis is shaking, you can tighten it;
Whether the bearing and the pulley are issued, the card can be lubricated for lubrication.

[Jan Si]

Hi all,

I am not so skilled in 3d printing.
I have A10M and sometimes I see a quality issues on my prints. It seems that there are skipped layers in the print.
I will be glad if anyone of you have solved it and can share his suggestions.

Thank you in advance!

Jan

2021-01-10 20_15_18-IMG_20210110_200816.jpg - IrfanView (Zoom_ 2344 x 1758).png (881.71 KiB) Viewed 6381 times