Page 1 of 1
Half sized prints
Posted: Wed Jan 27, 2016 6:11 am
by Sollyman
When axis is told to move 100mm it moves 50mm in all axis. I cannot find where to set steps/mm, or what is set wrong. Using Mac, and most screens are only for PC.
Re: Half sized prints
Posted: Wed Jan 27, 2016 3:37 pm
by Mark
find this line of code in configuration.h tab of your firmware or find it in your LCD under the menu Control->motion -> X/Y/Z steps.
#define DEFAULT_AXIS_STEPS_PER_UNIT {80,80, 80, 93}
Re: Half sized prints
Posted: Sat Apr 17, 2021 6:31 pm
by Sithinion1988
Geeetech has information about their print quality which holds Half-sized prints. So, you can get
research paper help to gain more techniques to manage their quality work. Basically, it provides axis is told to move 100 mm it moves 50 mm on all axis. They are solving problems via a provided team. Join them to contact all.