Unnecessary top cover

[Morogorn]

Greetings,

I use SketchUp 8.0, to design a RC wheel, export as .STL and .OBJ.
Import to Repetier Host and Slice with CuraEngine.
After repair the object, the wheel show a top cover.

How remove or not print this unnecessary top cover?

I try mark "Spiralize contour", not work.

Someone can help-me?

Best regards.

[_kaktus_]

Hello.


You wrote:

After repair the object, the wheel show a top cover.

What was the reason for this operation
Maybe it introduces a problem.

[Morogorn]

Thank for your reply _Kaktus_.

The message showed is:

5.jpg (78.59 KiB) Viewed 29304 times

Than I try slice without repair.

Not work.

[_kaktus_]

Would you agree to share your model with us before repair?
I will see what can be done.

[Morogorn]

Ok, it's here.

wheel.zip

(162.54 KiB) Downloaded 801 times

[_kaktus_]

Check it out now.

wheel2.zip

(23.01 KiB) Downloaded 737 times

[Morogorn]

Wow!

Perfect! What it's mistery?

6.JPG (135.71 KiB) Viewed 29295 times

[_kaktus_]

wheel2-.png (533.29 KiB) Viewed 29295 times

The best thing is that I didn't do anything with your model.
I imported in Tinkercad, set the position to the grid, and did the export.


Sometimes I ignored this message, and printed without repair.

[Morogorn]

Thank you _Kaktus_.

[_kaktus_]