Print quality issue

Post Reply
Sergio974
Posts: 9
Joined: Wed Jul 22, 2015 1:45 pm

Print quality issue

Post by Sergio974 » Thu Jun 02, 2016 8:52 pm

Hello,
Test.jpg
Layers misaligned
Test.jpg (76.02 KiB) Viewed 8799 times
Printing on g2s pro, layers are misaligned.
What to do ?

Thank you for answer.
Top
Toy
Site Admin
Posts: 116
Joined: Mon May 16, 2016 8:40 am

Re: Print quality issue

Post by Toy » Fri Jun 03, 2016 9:25 am

Maybe there's some errors in your slicer settings, here's my settings for G2S, you can try it
G2S-PLA-0.3-1.75.zip
nozzle0.3
(1.65 KiB) Downloaded 616 times
G2S-PLA-0.4-1.75.zip
nozzle0.4
(1.66 KiB) Downloaded 585 times
And you can check this link for print quality:
https://www.simplify3d.com/support/prin ... to-the-bed
Top
hpplotter
Posts: 1
Joined: Wed Sep 14, 2016 3:23 pm
Contact:
Contact hpplotter

Re: Print quality issue

Post by hpplotter » Wed Sep 14, 2016 3:27 pm

Printers can present a bewildering range of problems, There may be some problems in print ink.
Top
Post Reply

Return to “Print Quality”