first power on

Post Reply
jstoy
Posts: 9
Joined: Mon Apr 20, 2015 1:42 am

first power on

Post by jstoy » Mon Apr 20, 2015 1:54 am

First time I powered my Geeetech I3 Pro on I received relevant information on the lcd screen.

Since that time nothing is being displayed on the screen.

Using the Repetier software it says it can connect up to my printer, but when sending a file to the printer nothing ever happens.

My printer is using the ramps 1.4 board. When it is powered on I am seeing a red led flash twice on the arduino board and a green led flash twice on the ramps board. Also on the arduino board I am seeing a green led on as well.

Anybody have any troubleshooting ideas?
Top
zhangxueyou
Posts: 1405
Joined: Fri Feb 06, 2015 1:33 pm

Re: first power on

Post by zhangxueyou » Mon Apr 20, 2015 8:53 am

You can try to re-burn the firmware.
Top
jstoy
Posts: 9
Joined: Mon Apr 20, 2015 1:42 am

Re: first power on

Post by jstoy » Mon Apr 20, 2015 9:43 pm

Will try thanks!
Top
Post Reply

Return to “Others”