Page 1 of 1
Mirrored print
Posted: Wed Apr 15, 2015 4:40 pm
by ohruska
Please advice.
My printer prints parts mirrored against the model.
Ota
Re: Mirrored print
Posted: Wed Apr 15, 2015 5:05 pm
by zhangxueyou
Hi, what type is your pinter?
I think the quickest way is swapping the connetion of motors of x and y, and swapping the connection of x and y endstops.
Re: Mirrored print
Posted: Wed Apr 15, 2015 7:42 pm
by ohruska
I have PRUSA I3 from GREETECH
When I turned the commissioning of the Y-axis direction of the motor to drive in properly reference.
Re: Mirrored print
Posted: Wed Apr 15, 2015 8:08 pm
by ohruska
I have PRUSA I3 from Green
When I turned the commissioning of the Y-axis direction of the motor to drive in properly reference
Re: Mirrored print
Posted: Thu Apr 16, 2015 10:40 am
by zhangxueyou
These are the positive direction of x , and z axes.
- QQ截图20150416103734.png (678.36 KiB) Viewed 7415 times
Re: Mirrored print
Posted: Fri Apr 17, 2015 2:16 am
by ohruska
Thank you for your help.
Everything is already OK.
I had exchanged X and Y axis
Once again, thank Ota