Geeetech

Posted: **Mon Apr 13, 2015 3:54 pm**

I have switched place on the Sanguinolou for the bed therm and the extruder therm. And now I must have a new therm for the extruder.
The extruder therm is broken in two.
But I think it's something wrong with the Sanguinolou too. When I put the therm on where them are supposed to be I get min temp error in the display. But if I set the therm for bed in therm for extruder slot it's no errors. I don't understand why.
Please help me.

Posted: **Mon Apr 13, 2015 4:17 pm**

When LCD displays min error, what is the temperature reading?

Posted: **Mon Apr 13, 2015 4:31 pm**

The temp is 0,0

Posted: **Mon Apr 13, 2015 5:58 pm**

Both thermistor reading 0/0 when LCD displaying min temp error?

Posted: **Mon Apr 13, 2015 6:21 pm**

No only heatbed when the therm is in extruder slot, if I set it in bed slot it shows mintemp.

Posted: **Tue Apr 14, 2015 5:02 pm**

Please use a multimeter to test the resistance of thermistor,both.

Posted: **Tue Apr 14, 2015 6:01 pm**

The term is broken in two, its in TWO parts..
I have ordered new by my self. Thanks

Geeetech

Heatbed won`t heat

Heatbed won`t heat

Re: Heatbed won`t heat

Re: Heatbed won`t heat

Re: Heatbed won`t heat

Re: Heatbed won`t heat

Re: Heatbed won`t heat

Re: Heatbed won`t heat