Print: banding every 5 layers
Posted: Mon Apr 06, 2015 1:07 pm
Hi
Does anyone have this problem.
i3 pro with sangupolol 1.3. repetier, windows 7.
Nozzle 0.4mm, layer height 02.m speed set to 30mm/s for all.
Every print I do, and every 5 layers I have banding on the object.
I double check the banding is about the same size aas the Z-rode thread.
Is it because the z-rod thread is to big, or the firmware is not setting right.
Anyone has similar problem if yes, how did you fix it.
Thank
Does anyone have this problem.
i3 pro with sangupolol 1.3. repetier, windows 7.
Nozzle 0.4mm, layer height 02.m speed set to 30mm/s for all.
Every print I do, and every 5 layers I have banding on the object.
I double check the banding is about the same size aas the Z-rode thread.
Is it because the z-rod thread is to big, or the firmware is not setting right.
Anyone has similar problem if yes, how did you fix it.
Thank