SD Card Printing

Post Reply
swanny
Posts: 7
Joined: Mon Sep 14, 2015 3:34 pm

SD Card Printing

Post by swanny » Thu Sep 17, 2015 4:17 pm

Hi There,
I have the Aluminium Prusa I3 printer with Sanguinololu Controller. I'm having some problems getting the SD card reader to work. Could you advise if there's any limitations on the SC card slot. Eg:
* Max card size
* FAT type - FAT/FAT16/FAT32 etc
* Max filename length

When I insert the SD card, the controller can see the card ok, but doesn't display the files on the card. - Any Suggestions. Thanks

Regards
/swanny
Top
Mark
Posts: 1553
Joined: Thu Aug 06, 2015 9:19 am

Re: SD Card Printing

Post by Mark » Thu Sep 17, 2015 10:25 pm

What's the file format you use? The printer only reads gcode files.
Top
swanny
Posts: 7
Joined: Mon Sep 14, 2015 3:34 pm

Re: SD Card Printing

Post by swanny » Fri Sep 18, 2015 10:19 am

Yep! you're right. Bugga, I didn't think of that one. -Thanks
Top
Post Reply

Return to “Others”